8.[Administration] Tab Page[Setup] Item List 2098 [Administration] Tab Page Setting up Email PrintIn Email Print, you can set how the E-mail print jobs are printed.Item name Description1 Enable Print Header Select whether to print the E-mail header when receiving E-mail print jobs. [Disable] is setas the default.2 Enable Print Message Body Select whether to print the body message when receiving E-mail print jobs. [Enable] is setas the default.3 Maximum Email Body Print Enter the maximum number of pages to print the body strings of the received E-mail printjob. You can enter between 1 to 99. “5” is set as the default.4 Enable Print Email Error Select whether to print the report when an error occurs for E-mail printing. [Enable] is set asthe default.5 Enable Email Error Forward Select whether to send an error message to an administrative E-mail address when E-mailprinting cannot be completed. [Disable] is set as the default.6 Email Error Transfer Address If enabling the Email Error Forward, enter an administrative E-mail address where the errormessage is sent. You can enter up to 192 alphanumerical characters and symbols otherthan =, ; (semicolon) , #, and \ (backslash).7 Enable Partial Email Select whether to print E-mail jobs that are partially received. [Disable] is set as the default.8 Partial Wait time Enter how long this equipment should wait before printing a partial E-mail job. Specify withinthe range from 1 to 24 hours. “24” is set as the default.9 MDN Reply Select whether to send an MDN message reply or not when the equipment receives anE-mail print job with an MDN request. [Disable] is set as the default.123456789
