8.[Administration] Tab Page[Setup] How to Set and How to Operate 2298 [Administration] Tab Page Setting up Fax settingsYou can configure the fax device and fax operation settings from the [Fax] submenu under the [Setup] menu.y Some settings may not be reflected on the touch panel immediately after saving them. The settings will be updatedby pressing the [RESET] button on the control panel or after an Auto Clear time period.y The [Fax] submenu in the [Setup] menu is available only when the Fax Unit is installed.Setting the fax settings1 Start TopAccess access policy mode.P.22 “Access Policy Mode”2 Click the [Administration] tab.3 Click the [Setup] menu and [Fax] submenu.The Fax submenu page is displayed.4 In the Fax submenu page, set the fax settings as required.You can set the following in this page.P.186 “Setting up Fax Setting”5 Click [Save].The confirmation dialog box appears.When you click [Cancel] before saving the setting changes, they will not be saved and will return to the currentsettings. Note that they will not be returned to the factory default by clicking [Cancel]. This can only clear thechanges and restore the current settings before saving the changes.
