8 [Administration] Tab Page162 [Setup] Item List Setting up FTP ClientIn FTP Client, you can specify the default port number used for the Save as file using the FTP protocol.6 Account Name Enter the account name for this equipment to access the POP3 server. You can enter up to96 alphanumerical characters and symbols other than =, ; (semicolon), #, and \ (backslash).Enter the account name without the domain name when [NTLM/SPA] or [Kerberos] is selected in the [Authentication] option.7 Password Enter the password for this equipment to access the POP3 server. You can enter up to 96alphanumerical characters and symbols other than =, ; (semicolon), #, and \ (backslash).8 Scan Rate Enter how often this equipment should access the POP3 server for new messages. You canenter a value in the range from 0 to 4096. “5” is set as the default.9 Port Number Enter the port number to access the POP3 server. The SSL port number depends on theport setting in the POP3 server. You can enter a value in the range from 1 to 65535.Generally the default value “110” is used.10 SSL Port Number Enter the port number to access the POP3 server using SSL. The SSL port numberdepends on the port setting in the POP3 server. Generally "995" is used.11 POP3 Client ConnectionTimeout(1-180)Enter a timeout period for quitting communication when no response is received from thePOP3 server. Specify within the range from 1 to 180 seconds. “30” is set as the default.Item name Description1 SSL Setting Specify the certificate used in the SSL.y Disable — Select this to disable the SSL.y Verify with imported CA certification(s) — Select this to use the registeredcertificate(s).y Accept all certificates without CA — Select this to use all certificates.2 Default Port Number Enter the port number to access the FTP site. The port number depends on the port settingin the FTP site. You can enter a value in the range from 1 to 65535. Generally the defaultvalue "21" is used.Item name Description12
