8.[Administration] Tab Page[Setup] Item List 1838 [Administration] Tab Page Copier settingsYou can specify copier settings.The [Copier] submenu can be accessed from the [Setup] menu on the [Administration] tab.See the following pages for how to access it and information on the [Setup] menu:P.22 “Access Policy Mode”P.136 “[Setup] Item List”P.183 “Setting up Default setting”P.185 “Setting up Copy Job Enforcement Continue” Setting up Default settingIn Default setting, you can set the default copier settings that apply for copy operation from the touch panel.Item name Description1 Color Mode Select the default color mode for copying.y Auto Color — The equipment automatically judges the type of each color on originals.Colored originals are copied in full colors and black and white originals are copied inblack and white.y Full Color — All originals are copied in full colors.y Black — All originals are copied in black and white.Only [Black] can be selected when the No Limit Black function is enabled. For the details of the No Limit Black function, referto the User’s Manual Advanced Guide.2 Original Mode for Color Select the default original mode for color originals.y Text/Photo — Originals with text and photographs mixed.y Text — Originals with text (or text and line art) only.y Photo — Originals with general photographs on photographic printing paper.y Printed Image — Originals with photogravure (e.g. magazine, brochure).y Map — Originals with fine illustrations or text.3 Original Mode for Black Select the default original mode for black and white originals.y Text/Photo — Originals with text and photographs mixed.y Text — Originals with text (or text and line art) only.y Photo — Originals with photographs.y Image Smoothing — Originals with text and photographs mixed (especially originalsrequiring higher reproducibility on photos).4 Resolution Select the default copier resolution.y 300dpi — Select 300 dpi resolution.y 600dpi — Select 600 dpi resolution.5 Exposure for Color Select the type of image density for color copies.y Auto — Select this to set the Auto mode as the default exposure for color copy. TheAuto mode automatically detects the density of the original to make copies at theoptimum exposure.y Manual — Select this to set the Manual mode as the default exposure for color copy.The manual mode allows you to manually specify the density of the original.123456789101112
