8 [Administration] Tab Page202 [Setup] Item List Printer settingsYou can configure how the printer works and the printer options needed for the raw print jobs.The [Printer] submenu can be accessed from the [Setup] menu on the [Administration] tab.See the following pages for how to access it and information on the [Setup] menu:P.22 “Access Policy Mode”P.136 “[Setup] Item List”P.202 “Setting up General Setting”P.203 “Setting up Default Raw Job Setting”P.204 “Setting up Raw Job Setting” Setting up General SettingIn General Setting, you can specify the printer related options.Item name Description1 Period of time to savePrivate,Hold,Proof and invalid JobsSelect how long the private, hold, and test print jobs are kept. You can select in the rangefrom 1 to 12 hours, or from 1 to 30 days. Select [Indefinite] to retain all jobs in the queuesuntil a user manually deletes them. [14 Days] is set as the default.2 LT<-->A4 Select whether to print a document intended for one paper size can be printed on paper of adifferent size. For example, you can print a document set up for Letter size on A4 paper.When disabled, this equipment will prompt users for the correct paper size. [Enable] is setas the default.3 Wide A4 Mode (for PCL) Select whether the width of the printable area of copy paper is widened or not when you areprinting a PCL print job on A4 paper. Select [Enable] to widen it for approx. 3.5 mm / 0.14inch (when in a portrait direction) and approx. 1.5 mm / 0.06 inch (when in a landscapedirection). Thus more data can be printed for each line. [Disable] is set as the default.4 Restriction for Print Job Select whether or not to restrict printing certain print jobs.y None — Select this to print all data.y Only Private — Select this to print private print jobs only.y Only Hold — Select this to print hold print jobs only.y Only Private/Hold — Select this to print private and hold print jobs only.1234
