8 [Administration] Tab Page254 [Setup] How to Set and How to Operate Setting up Off Device Customization Architecture settingsFor the details of ODCA (Off Device Customization Architecture), contact your service representative or your servicetechnician.You can configure ODCA (Off Device Customization Architecture) from the [ODCA] submenu under the [Setup] menu.Some settings may not be reflected on the touch panel immediately after changing them. The settings will be updatedby pressing the [RESET] button on the control panel or after an Auto Clear time period.Setting the Off Device Customization Architecture settings1 Start TopAccess access policy mode.P.22 “Access Policy Mode”2 Click the [Administration] tab.3 Click the [Setup] menu and [ODCA] submenu.The ODCA submenu page is displayed.4 In the ODCA submenu page, set the Off Device Customization Architecture settings asrequired.You can set the following in this page.P.215 “Setting up Network”P.215 “Setting up Configuration”5 Click [Save].The confirmation dialog box appears.When you click [Cancel] before saving the setting changes, they will not be saved and will return to the currentsettings. Note that they will not be returned to the factory default by clicking [Cancel]. This can only clear thechanges and restore the current settings before saving the changes.
