8.[Administration] Tab Page[Setup] How to Set and How to Operate 2198 [Administration] Tab Page Setting up Network settingsYou can configure TCP/IP, Filtering, IPX/SPX, AppleTalk, Bonjour, LDAP, DNS, DDNS, SMB, NetWare, HTTP, SMTPClient, SMTP Server, POP3, SNTP Settings, FTP Client, FTP Server, SNMP, Security Setting, and others from the[Network] submenu under the [Setup] menu.Setting the network settings1 Start TopAccess access policy mode.P.22 “Access Policy Mode”2 Click the [Administration] tab.3 Click the [Setup] menu and [Network] submenu.The Network submenu page is displayed.4 In the Network submenu page, click link or scroll the page to find the setting table, andclick the button of the setting to set the network settings as required.You can set the following in this page.P.143 “Setting up TCP/IP” P.157 “Setting up HTTP Network Service”P.145 “Setting up Filtering” P.158 “Setting up SMTP Client”P.147 “Setting up IPv6” P.160 “Setting up SMTP Server”P.148 “Setting up IPX/SPX” P.161 “Setting up POP3 Network Service”P.149 “Setting up AppleTalk” P.162 “Setting up FTP Client”P.149 “Setting up Bonjour” P.163 “Setting up FTP Server”P.150 “Setting up LDAP Session” P.164 “Setting up SLP Session”P.151 “Setting up DNS Session” P.165 “Setting up SNMP Network Service”P.152 “Setting up DDNS Session” P.168 “Setting up Web Services Setting”
