8 [Administration] Tab Page150 [Setup] Item List Setting up LDAP SessionIn LDAP Session, you can enable or disable the LDAP directory service.Item name Description1 Enable LDAP Select whether the LDAP directory service is enabled or disabled. [Enable] is set as thedefault.2 Attribute 1 Enter the name of the schema corresponding to the LDAP server configuration. You canenter up to 22 alphanumerical characters and symbols other than =, ; (semicolon), #, and \(backslash).3 Attribute 2 Enter the name of the schema corresponding to the LDAP server configuration. You canenter up to 22 alphanumerical characters and symbols other than =, ; (semicolon), #, and \(backslash).4 Search Method Select search conditions for LDAP searching.y Partial match — Select this to search information partially matching the searchconditions.y Prefix match — Select this to search information that starts with contents matching thesearch conditions.y Suffix match — Select this to search information that ends with contents matching thesearch conditions.y Full match — Select this to search information fully matching the search conditions.1234
