8.[Administration] Tab Page[Setup] Item List 1618 [Administration] Tab Page Setting up POP3 Network ServiceIn POP3 Network Service, you can specify the POP3 server to receive an Internet Fax and E-mails.Item name Description1 Enable POP3 Client Select whether retrieving an Internet Fax and an E-mail from the POP3 server is enabled ordisabled. [Enable] is set as the default.2 Enable SSL Select whether the SSL (Secure Sockets Layer) is enabled or disabled for POP3transmission.y Disable — Select this to disable the SSL for POP3 transmission.y Verify with imported CA certification(s) — Select this to enable the SSL using theimported CA certificate.y Accept all certificates without CA — Select this to enable the SSL without usingimported CA certificate.y When [Verify with imported CA certification(s)] is selected, you must import the CA certificate in this equipment.P.272 “[Security] How to Set and How to Operate”y Not all operating systems support SSL for all protocols.3 POP3 Server Address Enter the IP address or FQDN (Fully Qualified Domain Name) of the POP3 server when[Enable POP3 Client] is enabled. You can enter up to 128 alphanumerical characters andsymbols other than =, ; (semicolon), #, and \ (backslash).If you use FQDN to specify the POP3 server, you must configure the DNS server and enable the DNS in the DNS Session.When the [Obtain a POP3 Server Address automatically] option is enabled in the TCP/IP settings, you can obtain the POP3server address from the DHCP server.P.143 “Setting up TCP/IP”4 Authentication Enable or disable the authentication for accessing the POP3 server.y Disable — Select this to disable the authentication.y NTLM/SPA — Select this to access the POP3 server using the NTLM/SPAauthentication.y Kerberos — Select this to access the POP3 server using the Kerberos authentication.5 Type POP3 Login Select the POP3 login type.y AUTO — Select this to automatically designate the POP3 log-in type of the POP3server.y POP3 — Select this to use the general POP3 log-in type.y APOP — Select this to use the APOP log-in type. APOP allows users to access thePOP3 server by encrypting the user name and password.If it is not possible to log in to the mail server using [Auto], manually set the type of POP3 log in to either [POP3] or [APOP].1234567891011
