8.[Administration] Tab Page[Setup] How to Set and How to Operate 2338 [Administration] Tab Page Setting up E-mail settingsYou can configure E-mail transmission operations from the [E-mail] submenu under the [Setup] menu.Some settings may not be reflected on the touch panel immediately after saving them. The settings will be updated bypressing the [RESET] button on the control panel or after an Auto Clear time period.Setting the E-mail settings1 Start TopAccess access policy mode.P.22 “Access Policy Mode”2 Click the [Administration] tab.3 Click the [Setup] menu and [Email] submenu.The Email submenu page is displayed.4 In the Email submenu page, set the E-mail settings as required.You can set the following in this page.P.198 “Email settings”5 Click [Save].The confirmation dialog box appears.When you click [Cancel] before saving the setting changes, they will not be saved and will return to the currentsettings. Note that they will not be returned to the factory default by clicking [Cancel]. This can only clear thechanges and restore the current settings before saving the changes.
