8.[Administration] Tab Page[Setup] How to Set and How to Operate 2258 [Administration] Tab Page Deleting SNMP V3 user information1 Click the [SNMP Network Service] button from the [Network] submenu under the[Setup] menu.2 Select the check box of SNMP V3 user information that you want to delete from theSNMP V3 user information list, and then click [Delete].Click [Delete All] to delete all the SNMP V3 user information.The confirmation dialog box appears.3 Click [OK].The SNMP V3 user information is deleted.4 Click [OK] to close the SNMP Network Service page.The confirmation dialog box appears.5 Click [OK].The specified or modified content is registered.6 Click [Save] on the Network submenu page.The confirmation dialog box appears.When you click [Cancel] before saving the setting changes, they will not be saved and will return to the currentsettings. Note that they will not be returned to the factory default by clicking [Cancel]. This can only clear thechanges and restore the current settings before saving the changes.
