8.[Administration] Tab Page[Setup] How to Set and How to Operate 2218 [Administration] Tab Page SNMP V3 settingsP.221 “Registering or editing SNMP V3 user information”P.223 “Exporting SNMP V3 user information”P.225 “Deleting SNMP V3 user information” Registering or editing SNMP V3 user information1 Click the [SNMP Network Service] button from the [Network] submenu under the[Setup] menu.2 Click [New] to create new SNMP V3 user information, or click the desired user name onthe list to edit SNMP V3 user information already registered.The Create SNMP V3 User Information page is displayed.3 Specify the following items and click [Save].You can set the following in this page.P.167 “[Create SNMP V3 User Information] screen”The Create SNMP V3 User Information page is closed and the newly created user information is registered on theSNMP V3 user information list.The confirmation dialog box appears.Clicking [Save] on the [Create SNMP V3 User Information] screen instantly registers the SNMP V3 user information,enabling the registered user to access this equipment via SNMP over a network.4 Click [OK].The specified or modified content is registered.5 Click [OK] to close the SNMP Network Service page.The confirmation dialog box appears.6 Click [OK].The specified or modified content is registered.
