8.[Administration] Tab Page[Setup] Item List 1578 [Administration] Tab Page Setting up HTTP Network ServiceIn HTTP Network Service, you can enable or disable Web-based services such as TopAccess and e-Filing web utility.Item name Description1 Enable HTTP Server Select whether the Web-based services such as TopAccess and e-Filing web utility areenabled or disabled. [Enable] is set as the default.2 Enable SSL Select whether the SSL (Secure Socket Layer) is enabled or disabled. When this is enabled,the data transferred between the equipment and client computers will be encrypted using aprivate key when operating TopAccess and e-Filing web utility. [Disable] is set as the default.Not all operating systems support SSL for all protocols.3 Primary Port Number Enter the port number for the NIC HTTP server. You can enter a value in the range from 1 to65535. Generally the default value "80" is used.4 Secondary Port Number Enter the port number for TopAccess and the e-Filing web utility. You can enter a value inthe range from 1 to 65535. Generally the default value "8080" is used.If you specify a duplicate port number with one of the other network settings to the secondary port number while SSL on HTTPis disabled, you will not be able to access TopAccess and the e-Filing web utility. If you make a mistake, use the control panelof the equipment to change the HTTP setting and enter the correct port number.5 SSL Port Number Enter the port number for the SSL. You can enter a value in the range from 1 to 65535.Generally the default value "10443" is used.If you specify a duplicate port number with one of the other network settings to the SSL port number in HTTP settings whileSSL on HTTP is enabled, you will not be able to access TopAccess and the e-Filing web utility. If you make a mistake, use thecontrol panel of the equipment to change the HTTP setting and enter the correct port number.12345
