119Manipulating Clips with Thumbnails : Shot MarkManipulating Clips with ThumbnailsA shot mark can be added to a clip thumbnail to distinguish this clip from the others.1 Press the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.2 Use the cursor buttons to move the pointer over theclip to which you want to attach a shot mark.3 Press the Shot Mark button.4 A shot mark will be attached to the clip thumbnailunder the pointer.To delete a shot mark, reposition the pointer over theclip and press the Shot Mark button.Notesz A shot mark can be attached during recording. Pleaserefer to [Shot Mark Function] (page 42) for moreinformation.z When adding a shot mark to (or deleting the shot markfrom) a clip recorded across multiple P2 cards, do thiswith all these P2 cards inserted into P2 card slots.During recording or playback, you can add text memos to clips. Text memos can be used to play back clips at some pointor break clips into chunks and copy the necessary portions.Text memos can be added in one of the following ways.z Press the TEXT MEMO button during recording orplayback of a clip. A text memo is added to the positionwhere the button is pressed.z Press the TEXT MEMO button when the thumbnailscreen is displayed. A text memo is added to thebeginning of the clip.NoteOne clip can have up to 100 text and voice memos incombination. Note that camera-recorder is not capable ofadding or showing voice memos.Shot MarkShot Mark ButtonText MemoAdding a text memoText Memo Button
