162 Menu : Menu Description TablesNoteThe screen is displayed whenSYSTEM MODE is set to 1080-59.94i, 1080-50i (HDmode).The ____ in the Adjustable Range column indicates thepreset mode.OUTPUT SELItems/Data SavedAdjustableRange RemarksOUTPUT ITEM MENU ONLYTCSTATUSSet the character contentssuperimposed onto the output signalsfor the VIDEO OUT connector (Analogor SDI) and MON OUT connector.MENU ONLY:Displays only when the menucharacters are superimposed. Nodisplay appears when other charactersare superimposed.TC:Display the time code. (Displays themenu when menu characters aresuperimposed.)NoteThe TC display position moves upand down depending on the cameraID position.STATUS:Display the same characterssuperimposed on the VF signal.(Displays the menu when menucharacters are superimposed.)– C U F –MONITOROUTVBSVFYSelect the output signal on the MON OUTconnector.VBS: Output a regular composite signal.VF: Output a VF Y signal. The statusdisplay is also superimposed.Y: Output a component Y signal.NoteThe VBS signal is output in playbackmode.– C U F –MONITOROUT CHARONOFFSelect whether or not to superimposecharacters on the MON OUT connectorsignal independently of the camera’sVIDEO OUT CHARACTER switch. (Thecharacter content is the same as thevideo output signal.)ON: Enable superimpose.OFF: Disable superimpose.– C U F –LCD MONCHARONOFFSelect whether or not to superimposecharacters on the LCD monitor. (Thecharacter content is the same as thevideo output signal.)ON: Enable superimpose.(Not interlocked with the VIDEOOUT CHARACTER switch.)OFF: Disable superimpose.(Not interlocked with the VIDEOOUT CHARACTER switch.)– C U F –VF MODE MEMCAMWhen the REC SIGNAL menu option onthe SYSTEM MODE screen is set toCAM, select the image to display in theviewfinder.MEM:Display the playback image in theplayback mode.CAM: Always display the camera image.– C U F –THUMBNAILOUTONOFFSelect whether or not to output clipthumbnails displayed on the LCDmonitor to the video output and monitoroutput signals.ON: Enable output.OFF: Disable output.NoteHD SDI signals are being output fromthe VIDEO OUT connector, thumbnailsare not output.– C U F –DOWNCON SETTINGItems/Data SavedAdjustableRange RemarksDOWNCONMODESQUEEZLT-BOXS-CROPFor setting the mode of the downconverter output signals.– C U F RDETAIL ONOFFFor setting the detail function for thedown converter output signals ON/OFF.The down converter output signalscontain detailed components that areset during HD signal processing. In thissetting, these signals overlap thedetailed components dedicated to thedown converter outputs.Even if this setting is turned off, it isimpossible to turn off the detailedcomponents set during HD signalprocessing.– C U F RH.DTL LEVEL 000831For setting the horizontal detailcorrection level for the down converteroutput signals.– C U F RV.DTL LEVEL 000431For setting the vertical detail correctionlevel for the down converter outputsignals.– C U F RDTL CORING 0001:15For setting the noise elimination level ofthe details.– C U F RH.DTL FREQ. 135For selecting the horizontal detailfrequencies.1: 2.5 MHz 4: 4 MHz2: 3 MHz 5: 4.5 MHz3: 3.5 MHz– C U F R2D LPF ONOFFFor setting the 2-D low path filterreducing cross colors.ON: Cross colors are reduced.OFF: Cross colors are not reduced.– C U F RSETUP 0%7.5%For setting the setup level for the downconverter output signals.Only for 1080-59.94iNoteWhen the system frequency is set to 50Hz, the setup level will be 0%.– C U F R
