17Parts and their Functions Audio (output) Function SectionParts and their Functions9. AUDIO OUT connector (XLR, 5-pin)This connector outputs audio signals recorded onChannels 1/2 or 3/4.Output signals are selected with the MONITORSELECT CH1/2 / CH3/4 selector switch.10.MONITOR SELECT (audio channel) CH1/2 /CH3/4 selector switchUse this switch to select the audio channel whosesignals are output to the speakers, earphones orAUDIO OUT connector.CH1/2: Signals on Audio Channels 1 and 2 are output.CH3/4: Signals on Audio Channels 3 and 4 are output.The channel indications on the display window and onthe audio level meter in the viewfinder aresynchronised with this selector switch.11.MONITOR SELECT (audio selection) CH1/3 /ST / CH2/4 selector switchThe MONITOR SELECT switch is synchronised withthe audio signal output to the speakers andearphones, and from the AUDIO OUT connector.CH1/3: Signal on Audio Channel 1 or 3 is output.ST: Stereo audio signals on Audio Channels 1and 2 or Audio Channels 3 or 4 are output.The stereo signals can be changed to mixedsignals using a menu option.CH2/4: Signal on Audio Channel 2 or 4 is output.* You can select between stereo and mixed signaltypes using the menu option MONITOR SELECT.This menu option can be found in the AUDIO2> screen on the MAIN OPERATION page.12.MONITOR (volume) controlUsed to control the volume of sound output from themonitor speakers and earphones.13.ALARM (warning alarm volume adjustment)Used to control the volume of the warning soundemitted from 14. speakers or earphones connected tothe 15. PHONES jack.If the control is minimised, no alarm is audible.14.SpeakersThe speakers output EE sound during recording, andreproduced sound during playback.The speakers emit an alarm sound when the warninglamp blinks and/or the indicator activates.When the 15. PHONES jack is connected withearphones, sound from the speaker is automaticallymuted.15.PHONES (earphones) jack (mini jack)This connector is designed for audio monitoring(stereo) earphones. When earphones are connected,sound from the speakers is automatically muted.Both the front and rear connectors output the samesound.Audio (output) Function SectionMonitorswitchMONITOR SELECT switchCH1/2 CH3/4CH1/3 Audio Channel 1 Audio Channel 3STStereo signals fromAudio Channels 1and 2*Stereo signals fromAudio Channels 3and 4*CH2/4 Audio Channel 2 Audio Channel 4
