15Parts and their Functions Power Supply and Accessory Mounting SectionParts and their Functions1. POWER switchUsed to turn on/off the power.2. Battery mountA battery pack from Anton/Bauer is mounted here.3. DC IN (external power input) socket (XLR, 4P)camera-recorder is connected to an external DCpower supply.4. BREAKER switchWhen an excessive amount of current is fed throughthe camera-recorder, due to any abnormal event, thebreaker automatically turns off the power in order toprotect the device.After the interior of the camera-recorder has beenchecked and/or repaired, this button must bedepressed. If there is no unusual reaction, the unit canbe powered-up.5. GPS connectorThis connects the optional GPS unit AJ-GPS910G.6. Shoulder strap fittingsThe shoulder strap is attached here.7. Light shoeA video light or similar accessory can be attachedhere.8. Lens mount (bayonet 2/3-type)The lens is attached here.9. Lens leverLower this lever to lock the lens to the lens mount.10.Lens mount capTo remove the cap, raise the 9. lens lever.When the lens is not mounted, replace the cap.11.Light cable clampSecures the light cable.12.Lens cable/microphone cable clampThis clamp secures the lens and microphone cables.13.Tripod mountWhen you want to mount camera-recorder on a tripod,the optional tripod adapter (SHAN-TM700) is attachedhere.14.LENS jack (12-pin)The lens connection cord is connected here. For adetailed description of your lens, see the relevantmanufacturer’s instruction manual.15.DC OUT (DC power supply) output socketThis output socket is designed for 12-VDC. It providesa maximum current of 1.5 A.Connect an external switch to this socket to controlREC starts and stops or an LED for use as a tallylamp. For more information, see [Connection of theexternal switch] (page 112).12346155 7 6981014 12 1311Parts and their FunctionsPower Supply and Accessory Mounting Section
