77Adjustments and Settings for Recording : Viewfinder Screen Status DisplaysAdjustments and Settings for RecordingThe messages that appear on the viewfinder screen toindicate changes to settings and adjustment results maybe limited, or set not to appear, through the menu optionDISP MODE. This menu option can be found in the DISPLAY> screen, which is accessible from the VF page.For directions on navigating the menu, see [Setting MenuOptions] (page 157).z: Message appears.±: Message does not appear.Display Modes and Setting Changes/adjustment Result Messages# < VF DISPLAY >DISP CONDITION :NORMALDISP MODE :3VF OUT :YVF DTL :3ZEBRA1 DETECT :070%ZEBRA2 DETECT :085%ZEBRA2 :SPOTLOW LIGHT LVL :35%RC MENU DISP. :OFF50M INDICATOR :OFFMARKER/CHAR LVL :50%SYNCHRO SCAN DISP :secMessage appears when: MessageDISP MODEsettings1 2 3CC/ND filter changed. FILTER: n (n=1, 2, 3, 4) ± ± zGain changed. GAIN: n dB(n=–3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30) ± ± zWHITE BAL switch re-positioned. WHITE: n (n=A, B, PRE) ± ± zOUTPUT/AUTO KNEE switch positioned at[AUTO KNEE] or [OFF]. AUTO KNEE: ON (or OFF) ± z zShutter speed/mode changed. SS: 1/100 (or 1/120, 1/250, 1/500, 1/1000, 1/2000,11/¢¢.¢ or 1¢¢¢.0d) ± z zWhite balance adjusted (AWB performed). Example: AWB A OK 3.2 K ± z zBlack balance adjusted (ABB performed). Example: ABB OK ± z zExtender selected. Example: EXTENDER ON ± ± zUSER button selected. Example: UM: S.GAIN 30 dB ± z zMARKER SELECT button selected. Example: MKR: A ± ± zIris being overridden. Example: ++ F 5.6 ± z zThe CAC lens is connected or removed. Example: CAC LENS DATA INVALID ± z z
