26 Parts and their Functions Display Window FunctionsError Code Indication (for more information, see[Warning System] (page 149))Display Window FunctionsP2 card/battery-remaining level indicationsMemory action status indicationLOOPhMEDIA E FY minM s frm13 240DVTCG TIME DATE P-iRECSLAVE HOLD W GPSBATT E FOVER OVER10OO40-dB3018HDOP-SLOTCTLNDFBattery-remaining level indication barFor a battery with a digital indicator (percentageindication), if the remaining level of the battery is higherthan 70%, all seven segments up to the “F” position are lit.When the remaining level falls below 70%, the segments go outone-by-one for each drop of 10%. All seven segments can be setto light up when the battery-remaining balance is 100%. To do soselect “100%” for the menu option BATT REMAIN FULL in the screen of the MAIN OPERATION page.Audio channel level meterWhen the MONITOR SELECT CH1/2 / CH3/4 switch is set to[CH1/2], the meter indicates 1 and 2 as the audio channelnumbers, together with their audio levels. When the switch isset to [CH3/4], the meter indicates 3 and 4 as the audiochannel numbers, together with their audio levels.Media-remaining space indication barThe bar indicates the remaining free space on each P2 card,using a seven-segment display.Each segment can represent either three or five minutes ofremaining free space, depending on the value set through themenu option CARD REMAIN/. According to the set value, thesegments disappear one-by-one. The menu option CARDREMAIN / can be found in the screenon the MAIN OPERATION page.LOOPhMEDIA E FY minM s frm13 240DVTCG TIME DATE P-iRECSLAVE HOLD W GPSBATT E FOVER OVER10OO40-dB3018HDOP-SLOTCTLNDFInformation indicationLOOP: Stays illuminated in LOOP REC mode. For informationabout the LOOP REC mode, see [ Loop Recording](page 37).OP-SLOT: Remains illuminated when a video encoder card isoperated in the optional slot.Mode indicationW: Stays illuminated when the camera-recorder operatesin SD mode (480-59.94i, 576-50i) and is set to 16:9mode.HD: Stays illuminated when the camera-recorder is in HDmode (1080i).GPS: Stays illuminated when radio waves are not receivedduring GPS operation.GPS : Stays illuminated when radio waves are receivedduring GPS operation.P-REC: Stays illuminated when the PRE REC MODE is set toON, and blinks when recording is continued after therecording tally lamp has gone out.iREC: Remains illuminated during INTERVAL REC moderecording, and blinks during a pause.i: Blinks when INTERVAL REC mode is selected.Time code indicationNDF: Stays illuminated when the time code is in non-dropframe mode.DF: Stays illuminated when the time code is in drop framemode.SLAVE: Stays illuminated when the time code is externallylocked.HOLD: Stays illuminated when the time code generator/readervalue is frozen.CTL: Stays illuminated when the DISPLAY switch ispositioned at [CTL] to display the CTL count.TCG: Stays illuminated when the DISPLAY switch ispositioned at [TC] (or [UB]) to display the TC (or UB)generator value.TC: Stays illuminated when the DISPLAY switch is positioned at[TC] (or [UB]) to display the TC (or UB) reader value.VTCG: Stays illuminated when the DISPLAY switch ispositioned at [UB] to display the VIUB generator value.VTC: Stays illuminated when the DISPLAY switch ispositioned at [UB] to display the VIUB reader value.TIME: Stays illuminated when the DISPLAY switch is positioned at[UB] to display the real-time hour, minute and second.DATE: Stays illuminated when the DISPLAY switch ispositioned at [UB] to display the real-time date.No Indication:The CTL, VTCG, TIME, and DATE stay off when the DISPLAYswitch is positioned at [UB] to display real time, time zone,hour and minute.Time count indication:The time code, CTL, user bits and real time are shown.NoteWhen the DISPLAY switch is positioned at UB, each press of theHOLD button changes the indication through VTCG (VTC) > DATE> TIME > No Indication (Time Zone) > TCG (TC), in that order.LOOPhMEDIA E FY minM s frm13 240DVTCG TIME DATE P-iRECSLAVE HOLD W GPSBATT E FOVER OVER10OO40-dB3018HDOP-SLOTCTLNDF
