Panasonic AG-MD830E Service Manual

2-2-2 Removal of the Front Panel1. Remove the Jog Dial on the Front Panel.2. Unscrew the 2 screws ( B ) as shown in the Figure.3. Unlock 2 locking portions ( F1 ), and carefully pull outthe Front Panel from the deck (Figure D3. ).Front Panel 2 Screws (B) [Top View 1@ @2 Locking Portions (F1)[ Bottom View 1Firure D32-2-3. Removal of the Bottom Plate1. Unscrew 6 screws (C)on the Bottom Plate.2. Lift off the Bottom Plate (Figure D4. ).[ Bottom View]Bottom Plate6 Screws (C)Figure D42-2-4. Removal of the Timer and Operation C.B.A.1. Disconnect the 2 Flexible Wires from the connectorP6701 and P6702 on the Timer and OperationC.B.A ..2. Unscrew the 2 screws (D) and a screw ( D-1 ) on theTimer and Operation C.B.A and unlock 5 lockingportions (F2).3. Carefully remove the Timer and Operation C.B.A.(Figure D5. )5 Locking Portions (F2) [ Front View]screw ( D-1 )01101101P6702 Timer & Operation 2 Screws P6701C.B.A. (D)Figure D52-2-5. Removal of the Cassette Compartment Unit1. Unscrew 2 screws(E) and slide the Cassette HolderUntil appearing 2 screws (F) and then unscrew 2screws (F) (Figure D6. ).2. Disconnect the Flexible Wire from connector P1508mounted on the Front Loading C.B.A., then carefullypull out the Cassette Compartment Unit.[Top View]Cassette 2 Screws (E)Compartment2 Screws (F) P1508Figure D62-3>--Ica~w(/)(/)«(/)c