Panasonic AG-MD830E Service Manual

3-4-3. LUBRICATION PROCEDURES OFTHE CAPSTAN SHAFT1. Remove the Pressure Roller Unit.2. Remove the Thrust Screw.3. Apply two drops of the oil (VFK0131) on the topof Capstan Shaft as shown in Figure M6-A.(TOP VIEW)(a) UPPER METAL(1 DROP)(b) UPPER METAL(1 DROP)Figure M6-A4. Turn the Thrust Adjustment Screw slowly toclockwise until the Capstan Rotor just startsturning (separate from the Capstan Stator).5. Turn the Thrust Adjustment Screw another180· clockwise as shown in Figure M6-B.6. Install the Pressure Roller Unit.7. Wipe the extra oil.o·~~180·Figure M6-B3-4-4. PROCEDURES FOR CLEANINGOF THE CYLINDER UNIT1. Position the Video Head to permit access forcleaning and hold the upper cylinder to keep itfrom turning while cleaning.2. Gently rub the Video Head in direction of tapetravel with Head Cleaning Stick moistened withCleaning.3. Repeat for the other video heads (Figure M7).Note: 1. Do not rub vertically.2. Do not apply any pressure to heads.LOWER CYLINDER VIDEO HEADCLEANING STICKFigure M73-7~enz«::c()w~