User guide Advanced menu101Paper width (Pagewid) This parameter determines the actual paper width.Select the Pagewid menu (3)Setting options: From 20 to 136 in 1/10 inch stepsDefault setting: 136/10 inch(136 characters at 10 characters/inch)If Head up = On, the printhead moves to the calculated centre of thepaper during the time the paper is moving in the protected zone. IfRightzo = On (see below), the printhead moves out of the perforationzone on the right as long as the paper is being transported.Set the printing width rather than the actual paper width.Confirm your settings with the Set key (1) and press the Next key (4)to access the next group of parameters.Left-hand area (Leftzon) If the parameter is On, the printhead moves out of the perforationzone (area) on the left as long as the paper is being transported. ThePagewid setting has no influence (see above).Select the Leftzon menu (2) (stands for left zone).Setting options: On/OffDefault setting: OffConfirm your settings with the Set key (1).Head up PagewidOnlineSetupBack Next21 3 4Pagewid=136/10"*OnlineSetupSet < > Exit21 3 4Leftzon RightzoOnlineSetupBack Next21 3 4Leftzon=Off *OnlineSetupSet < > Exit21 3 4
