The Menu User guide80Paper parameters (Paper) Selects the paper parameters Formlen (form length), FormAdj (firstprinting position) and Head (printhead gap, only if AGA=Off) sepa-rately for each paper source in the current menu.Non-installed and with the parameter PapOpt activated options can-not be selected.Press Paper (2) key.You can now choose between the following paper options:` Single` Tractor 1` ASF-F (Single sheet feeder front, option)` ASF-1/2 (Single sheet feeder rear, option)` Tractor 2 (front, option)Select the desired paperway, in our example Single (2). Press Next(4) key, to proceed to the installed optional paperways.Form length (Forml) You can define the form length in one of two ways: via the numberof lines or via standard formats (e.g. DIN A4).Press Forml (2) key.If you wish to define the form length via a line format, press Line (2)key.Paper AutoTearOnlineSetup21 3 4Back NextSingle Trac1OnlineSetup21 3 4Back NextForml FormAdjOnlineSetup21 3 4Back NextLines StandardOnlineSetup21 3 4Back Next