User guide The Menu79Menu lock (MenLock) With MenLock = Off, all functions and settings are accessible with-out restriction in Online, Offline and Setup mode.If MenLock = Menu is activated, all functions and settings are stillaccessible in Online and Offline mode, however, in Setup mode youcan only access the parameter groups Adjust (setting the print headgap [Head], top of form [TOF] and tear position [Tear]), Paperway(setting the paper path), Font (setting the font) and the characterspacing (CPI), while access to Menu mode (Menu key) is disabled.If you select MenLock = All, you can access the Online/Offline,Load/Park, Paper and Paper Feed (LineFeed/Form Feed, / )functions in Online and Offline mode while Setup mode is disabled.In this case, the Setup menu can only be called up by holding thekey Setup while switching on the printer.Press MenLock (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: Off, Menu, AllDefault Setting: MenuConfirm the setting by pressing the Set key (1).Language (Language) The menu can be shown in five languages on the LC display.Press Language (3) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: English, German, French, Italian,SpanishDefault Setting: EnglishConfirm the setting by pressing the Set key (1). Press the Next key(4) to access the next group of parameters.MenLock LanguageOnlineSetup21 3 4Back NextMenLock=Menu *OnlineSetupSet < > Exit21 3 4MenLock LanguageOnlineSetup21 3 4Back NextEnglish *OnlineSetupSet < > Exit21 3 4
