Advanced menu User guide102Right-hand area (Rightzo) If the parameter is On, the print head travels from the right-hand per-foration area towards the centre of the paper while the paper is mo-ving. The Pagewid option must be correctly set in this case, seePaper width (Pagewid) (page 101).Select the Rightzo menu (3).Setting options: On/OffDefault setting: OffIf this parameter is On, the print head carriage travels tothe centre of the form while the paper is loaded.Confirm your setting with the Set key (1) and press the Next key (4)to access the next group of parameters.Physical left margin (Physlm)Select the Physlm menu (3).Setting options: 0 to 30 in 1/10 inch stepsDefault setting: 0/10 InchPermanent (physical) setting of the left margin. This parameter can-not be changed by emulation-dependent margin settings. Marginsetting values entered by ESC sequences are added to the Physlm.Note that this value is subtracted from the maximum printingwidth of 13.6 inches.Confirm the setting by pressing the Set (1) key.All parameters described in the Paphand group may also bedefined via an ESC sequence (see Emulations (page 139) orProgrammer’s Application Manual).Press the Next key (4) to access the next group of parameters.Leftzon RightzoOnlineSetupBack Next21 3 4Rightzo=Off *OnlineSetupSet < > Exit21 3 4PhyslmOnlineSetupBack Next21 3 4Physlm= 0/10" *OnlineSetupSet < > Exit21 3 4