User guide Advanced menu107You can now either cancel the print job or load suitable paper. In thelatter case, the printer will resume the print job upon pressing theOnline key.If you press the Online key without having changed the paper,another line is printed until reaching the measured paper-endposition.The sensor interprets dark areas with a width of 13 mm ormore as the right-hand paper edge.If the sensor does not detect any black area, the maximumpossible printing width is used as the printable area.If there is a sensor malfunction (e.g. because of dirt, a defector misinterpretation of the paper width) it is necessary todeactivate the APW function (APW=Off), since otherwise theprintout will be too narrow or there will be no printout at all. Inthis case contact your service technician.Confirm the setting by pressing the Set (1) key. Change to the nextparameter group with the Next key (4).Automatic detection of thetop paper margin (AED)This menu option only appears, if a cut device is installed. It correctspossible inaccuracies of the paper positioning at the tear edge if thepaper path is changed after a cutting action.Select the AED (3) menu.Setting options: On/OffDefault setting: OffConfirm the setting by pressing the Set (1) key.STOPAPW AEDBack Next OnlineSetup21 3 4AED=Off *OnlineSetupSet < > Exit21 3 4
