The Menu User guide66Selecting emulation(Emulate)Selects the emulation. When a printer understands the control setwritten for another printer type, it is said to emulate the other printer.MTPL is also active in IBM or Epson emulation mode.Press Emulate (3) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: Epson LQ-2550, Epson LQ-2170,IBM Propr. XL24, IBM ProXL24+AGM,MTPLDefault Setting: Epson LQ-2550If the printer is switched to online mode after changing the emula-tion, it performs a reset.Confirm the setting by pressing the Set key (1). Press the Next key(4) to access the next group of parameters.Bidirectional printing(Bidir)Setting On: Printer prints in both directions (bidirectional).Setting Off: Printer prints only in one direction (from left to right).Press Bidir (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: On/OffDefault Setting: OnThe setting On will not be overwritten by ESC sequences.Confirm the setting by pressing the Set key (1).ESCChar EmulateOnlineSetup21 3 4Back NextEpson LQ-2550 *OnlineSetupSet < > Exit21 3 4Bidir I/OOnlineSetup21 3 4Back NextBidir=On *OnlineSetupSet < > Exit21 3 4
