User guide The Menu69Further Settings (Special) This parameter subgroup only appears if the serial port is used andthe ENQ/STX, ETX/ACK or ACK/NAK protocol is activated.Press Special (2) key.Error handling (ErrMode) On replaces the incorrect character with ?, Off deletes the entireblock.Press ErrMode (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: On/OffDefault Setting: OffConfirm the setting by pressing the Set key (1).Block end character (Blockend) End-of-block character definition; On: LF, FF, CR, VT, ETX, DEL;Off: ETX, DEL.Press Blockend (3) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: On/OffDefault Setting: OffConfirm the setting by pressing the Set key (1). Press the Next key(4) to access the next group of parameters.Special ProtocolOnlineSetup21 3 4Back NextErrMode BlockendOnlineSetup21 3 4Back NextErrMode=Off *OnlineSetupSet < > Exit21 3 4ErrMode BlockendOnlineSetup21 3 4Back NextBlockend=Off *OnlineSetupSet < > Exit21 3 4