The control panel User guide32Setup mode In this mode, the following settings are available:` Setup key: Sets the printer to setup mode, in which the followingsettings can be selected:` Menu key (1): Other menu settings. Acces may be disabled bythe manufacturer (see note below).` Adjust key (2): Sets the Tear position, first printing line and printhead gap.` Paperway key (3): Sets the Paper path.` Char key (4): Sets the font and the number of characters perinch.Access to the other menu settings (Menu) may be disabled bythe manufacturer.Proceed as follows to release this lock temporarily.1 Switch off the printer for approx. 5 seconds.2 Switch the printer on again keeping the Setup key pressed.For information on how to enable access permanently andabout the available settings, refer to the section Menu lock(MenLock) (page 79) and Menu parameters (page 61).Adjust PaperwayMenu Char OnlineSetup21 3 4