The Menu User guide84View and tear position(AutoTear)The auto tear function or the auto view function can be selected asdesired.When auto view is switched on, the last printed text is visible. Assoon as data is received the paper moves to the “normal” print posi-tion. After printing the printer waits for the given interval to bring thepaper once more to the auto view position.The paper is in the tear off position when auto tear is switched on,the perforation of the paper is positioned at the tear off edge of theprinter. If data is received, the paper returns to the normal print po-sition. After printing, the printer waits for the given interval to bringthe paper once more to the tear off position. If the tear off edge doesis not aligned with the perforation of the paper then this can be cor-rected.Press AutoTear (3) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: ViewTear=Off,View=1s/3s/6sTear=1s/3s/6sTear at TOFDefault Setting: ViewTear=OffIf the parameter View Tear = Off is set, the paper can still bebrought into a View or Tear position via a specific sequence (seepage 147) or the Tear key.If the parameter Tear at TOF is set, the paper perforation is auto-matically positioned at the tear off edge as long as the current printposition TOF is activated. Feeding takes place after approx. 1.5 sec-onds (hold time). If any data is received during this period of time thepaper is not positioned at the tear off edge. With this function it mustbe noted that the printer may only be switched off when the print po-sition is at TOF.Confirm the setting by pressing the Set key (1). Press the Next key(4) to access the next group of parameters.Paper AutoTearOnlineSetup21 3 4Back NextViewTear=Off *OnlineSetupSet < > Exit21 3 4
