User guide Emulations149✓ \; Transparent mode for the characters following✓ ^ Transparent mode for the character following✓ _ Overline ON/OFF✓ ✓ ✓ ✓ 0 Set line feed to 1/8 inch✓ 1 Set line feed to 7/72 inch✓ ✓ ✓ ✓ 2 Set line feed to 1/6 inch✓ 2 Set line feed to n/72 inch✓ ✓ ✓ 3 Set line feed to n/180 inch✓ 3>n> Set line feed to n/216 inch✓ ✓ 4 Italics ON✓ ✓ 4 Set beginning of form✓ ✓ 5 Italics OFF✓ ✓ 5 Autom. line feed ON/OFF✓ ✓ 6 Print ASCII codes dec. 129 to dec. 159✓ ✓ 6 PC character set 2 (expanded)✓ ✓ 7 Suppress ASCII codes 129 to 159✓ ✓ 7 PC character set 1 (standard)✓ a Select orientation✓ ✓ ✓ A Line spacing n/60 inch✓ A Prepare line spacing n/72 inch✓ b<0> Clear all tabs✓ b<0> Set vertical tabs in channels✓ ✓ ✓ ✓ B<0> Clear all vertical tabs✓ ✓ B...<0> Set vertical tabs✓ ✓ B...<0> Set vertical tabs✓ c Reset to initialisation status✓ c Setting the horizontal motion index (HMI)✓ ✓ ✓ ✓ C<0> Set form length in inches✓ ✓ ✓ ✓ C Set form length in lines✓ ✓ ✓ d Perform relative horizontal step✓ ✓ ✓ ✓ D<0> Clear all horizontal tabs✓ ✓ ✓ ✓ D...<0> Set horizontal tabs✓ ✓ Condensed printing OFF✓ ✓ Double-wide printing OFF (set with or )✓ ✓ ✓ ✓ E Bold ON✓ ✓ 0 Deselect single sheet operationMTPL IBMXL24IBMAGMEpsonLQ-2550EpsonLQ-2170 Code Function
