Emulations User guide142List of available controlcodesThe following table shows sequences marked by a ✓ if they areavailable in the various emulations. The MTPL sequences can beused within all emulation modes. The corresponding sequences aremarked by a ✽.If you want to know more about control codes, we recommendour Programmer’s Application Manual on this CD-ROM.MTPL IBMXL24IBMAGMEpsonLQ-2550EpsonLQ-2170 Code Function✓ ✓ ✓ ✓ Signal tone✓ ✓ ✓ ✓ ✓ Control character BS (Backspace)✓ ✓ Deleting a data line✓ ✓ ✓ ✓ ✓ Control character CR (Carriage return)✓ Start character for MTPL sequences, corr. ESC [✓ ✓ Selecting the printer✓ ✓ Condensed printing OFF (set by or )✓ ✓ Deselecting the printer✓ ✓ Double-wide printing OFF (set by or )✓ ✓ ✽ ✓ ✓ Delete line. Epson: Delete last character✓ ✓ ✓ ✓ ✓ Start character for programming sequence✓ ✓ ✓ ✓ ! Print mode selection✓ ✓ ✓ # Bit 8 = unchanged✓ ✓ $ Perform absolute horizontal step✓ ✓ %<0><0> Select ROM character generator✓ ✓ %<1><0> Select download generator✓ ✽ ✽ ✽ ✽ %1 Graphics print with 180 dpi/HQ✓ ✽ ✽ ✽ ✽ %2 Graphics print with 360 dpi/HQ✓ ✽ ✽ ✽ ✽ %3 Graphics print with 60 dpi✓ ✽ ✽ ✽ ✽ %4 Graphics print with 120 dpi✓ ✽ ✽ ✽ ✽ %5 Graphics print with 80 dpi✓ ✽ ✽ ✽ ✽ %7 Graphics print with 240 dpi✓ ✽ ✽ ✽ ✽ %8 Graphics print with 72 dpi✓ ✽ ✽ ✽ ✽ %9 Graphics print with 90 dpi✓ ✓ &.. Define download character✓ ✽ ✽ ✽ ✽ (& Character set ISO 8859-2✓ ✽ ✽ ✽ ✽ (* Character set ISO 8859-5✓ ✽ ✽ ✽ ✽ (+ Character set ISO 8859-1 SAP