User guide The Menu67Settings for interfaces (I/O) In this parameter group, you can choose various settings for theprinter interfaces. See also Interfaces (page 157).Press I/O (3) key.Serial interface (Serial) This parameter group only is valid, if an optional serial interfacemodule is installed.To ensure the proper functioning of serial data trans-fers, the serial settings of the printer and computer(host) must coincide.Press Serial (2) key.Data transmssion rate (Baud) Selects the data transmission rate (baud rate) (baud = bit per sec-ond).Press Baud (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: 600, 1200, 2400, 4800, 9600, 19200Default Setting: 9600Printer and computer must have the same baud rate.Confirm the setting by pressing the Set key (1).Bidir I/OOnlineSetup21 3 4Back NextSTOPSerial Interf.OnlineSetup21 3 4Back NextBaud FormatOnlineSetup21 3 4Back NextBaud= 9600 *OnlineSetupSet < > Exit21 3 4
