User guide The Menu65Skiping perforation (Skip) Skips the perforation; 7 different values (in inches) can be defined.Press Skip (3) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: 0.0 to 3.5 Inch in steps of 0.5 inchDefault Setting: 0.0 InchConfirm the setting by pressing the Set key (1). Press the Next key(4) to access the next group of parameters.Selecting start signal forescape sequence(ESCChar)Selects the start signal for control sequences. Setting ESC: Onlycharacter Escape can be used. Setting ESC+$$: Character Escapeor alternatively two $ characters ($$) can be used. For more infor-mation see the section The $$ procedure (page 140).Press ESCChar (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: ESC/ESC+$$Default Setting: ESCConfirm the setting by pressing the Set key (1).LPI SkipOnlineSetup21 3 4Back NextSkip= 0.0 Inch *OnlineSetupSet < > Exit21 3 4ESCChar EmulateOnlineSetup21 3 4Back NextESCChar=ESC *OnlineSetupSet < > Exit21 3 4