User guide The Menu85Line length (Width) Selects the line length in inches. With the setting of 8 Inch, the print-er operates like a printer with a width of only 8 inches.Press Width (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: 8 Inch, 13.2 Inch, 13.6 InchDefault Setting: 13.6 InchConfirm the setting by pressing the Set key (1). Press the Next key(4) to access the next group of parameters.Barcode (Barcode) With this function selected it is posible to print different barcodes andLCP (Large Character Printing).Press Barcode (2) key.Use the < (2) or > (3) key to select the desired setting.Setting Options: On/OffDefault Setting: OffThe definition and activation is performed by special sequencesthrough the interface. Since this selection is possible for all emula-tions it must be noted that con-flicts in sequence conformity with theselected emulation may occur. For this reason the barcode functioncan also be switched on and off by MTPL sequences. (The possiblebarcodes, LCP characters and the operation of these functions aredescribed in the Barcode Programmer’s Application Manual).Confirm the setting by pressing the Set key (1).WidthOnlineSetup21 3 4Back NextWidth=13.6Inch *OnlineSetupSet < > Exit21 3 4Barcode BarmodeOnlineSetup21 3 4Back NextBarcode=Off *OnlineSetupSet < > Exit21 3 4