X ero x 4 5 95 Co pi e r/P ri n te r S y s t em Ad m i ni s t rat i on G ui d e 5-195 . Us i n g th e S c a n Se rv i c e6. Select Close repeatedly until the System Settings screen isdisplayed.7. Select Exit.8. After the machine is restarted, print out the Printer SettingsList to confirm that the ports are enabled and TCP/IP isconfigured.Configuring the SNMP portConfigure the transport protocol for the SNMP port usingCentreWare Internet Services.1. Start a web browser.2. Enter the machine’s IP address or the Internet address to theaddress entry column on the browser, and press the Enter key.• Example of the IP address entry:http://192.168.1.1/• Example of the Internet address entry:http://xxx.yyyy.zz.vvv/NOTE: When specifying a port number, add “:” and a portnumber to the end of the Internet address.3. Click the Properties tab.4. Click Port Status from the Properties area.5. Select the UDP checkbox to the right of SNMP (Port Statusfeature).6. Reflect the values as the setting values of the machine.a. Click the Apply New Settings.b. Enter the System Administrator UserID and password intoUser Name and Password, and then click OK.NOTE: The default User ID value is 11111 and password is x-admin.c. The right frame on the web browser will change to themachine reboot display.d. Click Reboot. The machine will reboot and the settingvalue will be reflected.
