X e ro x 4 5 95 Co p ie r/ P rin t er S y s te m Ad m i ni s t rat i on G ui d e3-23. U s ing C e nt reWa re I nt ern e t Service sConfiguration on the machineThis section describes the configuration procedure for usingCentreWare Internet Services on the machine.First enable the Internet service port, then set the IP address.1. Display the System Administrator Menu screen.a. Press the Log In/Out button.b. Enter the UserID using the numeric keypad and thenselect Confirm.NOTE: The default User ID value is 11111. When using theAuthentication feature, a password is required. The defaultpassword is x-admin.c. Select System Settings.2. Enable the Internet service port on the machine.a. Select System Settings.b. Select Network Settings.c. Select Port Settings.d. Select Internet Service (HTTP) and then select ChangeSettings.e. Select Internet Service - Port and then select ChangeSettings.f. Select Enable and then select Save.g. Select Close repeatedly until the Network Settingsscreen is displayed.3. Set the IP address.If the IP address is already set, this step is not necessary.Also, in an environment with DHCP or BOOTP, configure theway to obtain the address. If the address cannot be obtainedautomatically or manual configuration is preferred, configurethe IP address, subnet mask, and gateway address.a. Select Protocol Settings.b. Select TCP/IP - Get IP Address and then select ChangeSettings.c. Select one from DHCP, BOOTP, RARP, DHCP/Autonet orManual. If you select anything other than Manual, proceedto step 4.NOTE: When using a DHCP server, also configure the WINS(Windows Internet Name Service) server.d. Select TCP/IP - Get IP Address and then select ChangeSettings.e. Enter the IP address using the numeric keypad.
