X ero x 4 5 95 Co pi e r/P ri n te r S y s t em Ad m i ni s t rat i on G ui d e 8-1278 . S e t upsNOTE: Notice that print data exceeding the set memorycapacity is not accepted. In such cases, select Hard Disk orOff.• Hard Disk Spool: When selected, the machine will usespooling. The receiving buffer for spooling uses the hard disk.Receiving Buffer - IPPSpool• Off: When Off is selected, the machine will not use spooling.While IPP print processing is being carried out for one client,data cannot be received over the same interface from anotherclient. Set a value for the dedicated IPP receiving buffermemory capacity from 64 to 1024 KB, in 32 KB increments.• Hard Disk: When selected, the machine will use spooling.The receiving buffer for spooling uses the hard disk.Receiving Buffer -EtherTalkSet the EtherTalk receiving buffer. Set a value from 1024 to 2048KB, in 32 KB increments.Receiving Buffer - Port9100Set the Port9100 receiving buffer. Set a value from 64 to 1024KB, in 32 KB increments.Other SettingsFor information about each of the following items, refer toOverview of features page 1, and also refer to the appropriatechapter (see the Table of contents) in the PostScript User Guide.Make settings relating to the paper used in the machine.1. Select Other Settings.2. Select the item to be set or changed, and select ChangeSettings.3. Select the item to be changed.4. Select Save.
