X e ro x 4 5 95 Co p ie r/ P rin t er S y s te m Ad m i ni s t rat i on G ui d e9-1 29. Trou b le s h oo ti n gWhen the print output is not as you expectedNotes and RestrictionsThe following are the notes and restrictions for using TCP/IP(LPD).Configuration on the Machine• Take maximum care with the IP address settings. IPaddresses are managed throughout the system as a whole.The configuration should be performed only after consultingwith your network administrator.• Subnet Mask and Gateway addresses may be necessarydepending on the network environment. Confirm with thenetwork administrator and set up the necessary items.• When the port status is set to Enable, it sometimesautomatically switches to Disable if the machine hasinsufficient memory. If this happens, either set an unused portto Disable, or adjust the assigned memory size.• Adjust the receiving buffer lpd (Spool) size according tousage. When the receiving buffer lpd (Spool) size is smallerthan the transmitted data, the machine may not be able toreceive the data.Configuration on the Computer• Take maximum care with the IP address settings. IPaddresses are managed throughout the system as a whole.The configuration should be performed only after consultingwith your network administrator.• When performing network settings (IP address, and so forth)on a host under the NIS (Network Information Service)management, consult with the NIS administrator.Cause Check point RemedySelected print language on themachine does not match the printlanguage of the print data.Confirm the selected printlanguage on the machine and theprint language of the print data.Select the print language on themachine to match the print data.The computer is not using the printdriver supplied with the machine(using a print driver from anothercompany).Confirm if the print driver on thecomputer is the one supplied withthe machine.Select the print driver suppliedwith the machine on the computer.If it does not appear on theselection list, install the print driversupplied with the machine andselect it. The operation is notguaranteed if another print driveris used.
