Xerox ® AppsXerox ® VersaLink ® C405 Color Multifunction Printer 111User Guide8. Adjust scanning features as needed.9. To begin the scan, press Scan.The printer scans your images to the folder that you specified.10. If you are scanning from the document glass, when prompted, to finish, touch Done or to scananother page, touch Add Page.Note: If you are scanning a document from the automatic document feeder, a prompt does notappear.WARNING: Do not remove the USB Flash drive while the device is scanning and processing thejob. If you remove the Flash drive before the transfer is complete, the file can become unusableand other files on the drive can be damaged.11. To return to the Home screen, press the Home button.Printing From a USB Flash DriveYou can print a file stored on a USB Flash drive. The USB port is on the front of the printer.Notes:• If the device is in Power Saver mode, before proceeding with the Print job, to wake the device,press the Power Saver button.• Only USB Flash drives formatted to the typical FAT32 file system are supported.To print from a USB Flash drive:1. Insert the USB Flash drive into the USB memory port on the printer.2. At the USB Drive has been detected screen, touch Print from USB.Note: If this feature does not appear, enable the feature or contact the system administrator.For details, refer to theSystem Administrator Guide at www.xerox.com/office/VLC405docs.3. Add files to the Document Source Table.− To print a group of print-ready files, for the USB drive or folder, touch the Select All icon.Verify that your files are selected.− To print a specific file, browse to that file, then touch the file name or icon.4. Touch OK.5. Confirm that the required files are listed.− To select more files, touch Add Document, then touch OK.− To remove a file name from the list, touch the file name, then touch Remove.6. Select the paper supply, quantity, output color, and 2-sided printing options.7. Touch Print.8. When you are finished, remove the USB Flash drive.
