Paper and MediaXerox ® VersaLink ® C405 Color Multifunction Printer 143User GuideSupported Paper Types and Weights for Automatic 2-Sided PrintingPaper Type WeightRecycledCustom 160–105 g/m²BondHole-PunchedLetterheadPlainPre-Printed75–105 g/m²Lightweight CardstockLightweight Glossy Cardstock106–163 g/m²CardstockGlossy Cardstock164–220 g/m²Supported Custom Paper SizesTray Number Paper SizesTray 1 Minimum: 148 x 210 mm (5.8 x 8.3 in.)Maximum: 216 x 356 mm (8.5 x 14 in.)Tray 2 Minimum: 148 x 210 mm (5.8 x 8.3 in.)Maximum: 216 x 356 mm (8.5 x 14 in.)Bypass Tray Minimum: 76.2 x 127 mm (3 x 5 in.)Maximum: 216 x 356 mm (8.5 x 14 in.)2-Sided Printing Minimum: 148 x 210 mm (5.8 x 8.3 in.)Maximum: 216 x 356 mm (8.5 x 14 in.)CardstockYou can print Cardstock up to 220 g/m² from any tray. For types and weights of supported Cardstock for1-Sided printing, refer to Supported Paper Types and Weights on page 142. For types and weights ofsupported Cardstock for 2-Sided printing, refer to Supported Paper Types and Weights for Automatic2-Sided Printing on page 143.Follow the guidelines for printing on glossy cardstock:• Do not open sealed packages of glossy cardstock until you are ready to load them into the printer.• Leave glossy cardstock in the original wrapper, and leave the packages in the shipping carton untilready to use.• Remove all other paper from the tray before loading glossy cardstock.• Load only the amount of glossy cardstock you are planning to use. Do not leave glossy cardstock inthe tray when you are finished printing. Replace unused cardstock in the original wrapper and seal.• Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy cardstock tocurl and jam in the printer.• In the print driver software, select the desired glossy cardstock type or select the tray loaded withthe desired paper.
