Getting Started42 Xerox ® VersaLink ® C405 Color Multifunction PrinterUser Guide9. Power on the printer.Note: If the printer was installed previously in a wireless network environment, it could retain setup andconfiguration information from that environment. To prevent the printer from attempting to connect tothe previous network, reset the wireless settings. For more information, refer to theSystem AdministratorGuide at www.xerox.com/office/VLC405docs.Connecting to Wi-Fi DirectYou can connect to your printer from a Wi-Fi mobile device, such as a tablet, computer, or smart phone,using Wi-Fi Direct. Wi-Fi Direct is disabled by default.Note: Wireless networking is available only on printers with the optional Wireless NetworkAdapter installed.To connect with Wi-Fi Direct, follow the directions provided with your mobile device.Connecting with Wi-Fi Direct from Your Mobile DeviceTo connect with Wi-Fi Direct, follow the directions provided with your mobile device.Connecting to a Telephone LineWARNING: To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or largertelecommunication line cord.1. Ensure that the printer is powered off.2. Connect a standard RJ11 cable, No. 26 American Wire Gauge (AWG) or larger, to the Line porton the back of the printer.3. Connect the other end of the RJ11 cable to an operating telephone line.4. Power on the printer.5. Enable and configure the Fax functions.
