Xerox ® Apps94 Xerox ® VersaLink ® C405 Color Multifunction PrinterUser GuideScanning to a USB Flash DriveYou can scan a document and store the scanned file on a USB Flash drive. The Scan to USB functionproduces scans in .jpg, .pdf, .pdf (a), .xps, and .tif file formats.Notes:• If the device is in Power Saver mode, before proceeding with the USB scan, to wake the device,press the Power/Wake button.• Only USB Flash drives formatted to the typical FAT32 file system are supported.To scan to a USB Flash drive:1. Load the original document on the document glass or in the duplex automatic document feeder.2. At the printer control panel, press the Home button.3. Insert your USB Flash drive into the USB memory port on the front of the printer.4. At the USB Drive has been detected screen, touch Scan to USB.Note: If this feature does not appear, enable the feature or contact the system administrator.5. To save the scanned file to a specific folder on the USB Flash drive, navigate to the directory whereyou want to save your file, then touch OK.6. To save the scanned document as a specific file name, touch the attachment file name, then entera new name using the touch screen keypad. Touch Enter.7. To save the scanned document as a specific file format, touch the attachment file format, thenselect the required format.8. Adjust scanning features as needed.9. To begin the scan, press Scan.The printer scans your images to the folder that you specified.10. If you are scanning from the document glass, when prompted, to finish, touch Done or to scananother page, touch Add Page.Note: If you are scanning a document from the automatic document feeder, a prompt does notappear.WARNING: Do not remove the USB Flash drive while the device is scanning and processing thejob. If you remove the Flash drive before the transfer is complete, the file can become unusableand other files on the drive can be damaged.11. To return to the Home screen, press the Home button.
