Xerox ® Apps84 Xerox ® VersaLink ® C405 Color Multifunction PrinterUser GuideBook CopyingYou can use the Book Copying feature to copy books, magazines, or other bound documents. You canuse this feature to copy images for different results.• Copy either the left or right page onto a single sheet of paper• Copy both the left and right pages onto two sheets of paper• Copy both the left and right pages as a single image onto one sheet of paperNote: To make copies from books, magazines, or other bound documents, use the documentglass only. Do not place bound original documents in the document feeder.To set up book copying:1. At the printer control panel, press the Home button.2. Touch Copy.3. Touch Book Copying.4. Touch Mode, then select one of the following options:− Off: This option is the default setting.− Both Pages: This option scans both pages of an open book onto two sheets of paper.− Left/Right Page Only: This option scans the left or right page of an open book onto a singlesheet of paper.5. If Binding Edge Erase is required, touch Binding Edge Erase, then move the slider to the right toerase up to 50 mm (1.97 in).6. Touch OK.Shifting the ImageYou can change the placement of an image on the copy page. This is useful if the image is smaller thanthe page size.For image shift to work correctly, position original documents as follows:• Document Feeder: Position original documents face up, short edge entering the feeder first.• Document Glass: Position original documents face down, in the upper-left corner of the documentglass, short edge to the left.To change the placement of the image:1. At the printer control panel, press the Home button.2. Touch Copy.3. Touch Image Shift.4. Select one of the following options.− Off: This option is the default setting.− Auto Center: This option centers the image on the page.− Snap to Edge: This option shifts the image to the edge of the document. Select one of theimage-position options.• Mirror Side 1: This option allows you to set the Image Shift for Side 1, and matches theSide 2 Image Shift accordingly. To move the image to the required edge of the page,touch the appropriate arrow.
