Paper and Media144 Xerox ® VersaLink ® C405 Color Multifunction PrinterUser GuideLoading PaperThis section includes:• Changing Paper Settings.............................................................................................................................................144• Loading Paper in Trays 1 and 2 ................................................................................................................................144• Loading Paper in the Bypass Tray ...........................................................................................................................147• Configuring Trays 1 or 2 for the Paper Length ...................................................................................................150Changing Paper SettingsWhen you load paper into a tray, you can change the tray settings. The following options are available:− Fully Adjustable: If you select this paper setting, you can change the paper size, type, andcolor when you load paper into the tray.− Dedicated: If you select this paper setting, you cannot change the paper size, type, and colorwhen you load paper into the tray.− Bypass: When paper is present in this tray, it is used for print jobs where you did not specifya particular tray.For details on how to change the paper setting when loading paper in trays 1 and 2, refer to LoadingPaper in Trays 1 and 2. on page 144 For details on how to change the paper setting when loading paperin the bypass tray, refer to Loading Paper in the Bypass Tray on page 147.Loading Paper in Trays 1 and 2You can adjust the length of the paper tray to accommodate A4, Letter (8.5 x 11 in.), and Legal(8.5 x 14 in.) paper sizes.To load paper in Trays 1 and 2:1. To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,then pull it out.
