C.2 European StandardsFigure C.1 CE MarkThe CE mark indicates compliance with European safety and environmental regulations andis required for engaging in business and commerce in Europe.European standards include the Machinery Directive for machine manufacturers, the LowVoltage Directive for electronics manufacturers and the EMC guidelines for controlling noise.This drive displays the CE mark based on the EMC guidelines and the Low Voltage Directive.• EMC Guidelines: 2004/108/EC• Low Voltage Directive: 2006/95/ECu CE Low Voltage Directive ComplianceThis drive has been tested according to IEC61800-5-1:2007, and it fully complies with theLow Voltage Directive.To comply with the Low Voltage Directive, be sure to meet the following conditions whencombining this drive with other devices:n Area of UseDo not use drives in areas with pollution higher than severity 2 and overvoltage category 3 inaccordance with IEC664.n Installing Fuses on the Input SideInstall recommended UL-approved fuses at the main power input of the drive. Select fusesaccording to Table C.1.Table C.1 Recommended Input Fuse SelectionDrive ModelCIMR-JoClass T FusesClass RK5 FusesModel Fuse AmpereRating200 V Class Single-Phase DrivesBA0001 A6T15 15 Contact YaskawaBA0002 A6T20 20 Contact YaskawaBA0003 A6T20 20 Contact YaskawaBA0006 A6T40 40 Contact YaskawaC.2 European StandardsYASKAWA ELECTRIC TOEP C710606 25B YASKAWA AC Drive J1000 Installation & Start-Up Manual 229C Standards Compliance
