2.2.2 Componentsn CPU (head module)n Bus coupler (head module)n Line extensionn Periphery modulesn AccessoriesCAUTION!Only modules of VIPA may be combined. A mixed operation with third-party modules is not allowed!With this CPU 01xC, the CPU electronic, input/output components and power supply areintegrated to one casing. In addition, up to 64 periphery modules of the System SLIO canbe connected to the backplane bus. As head module via the integrated power supplyCPU electronic and the I/O components are power supplied as well as the electronic ofthe connected periphery modules. To connect the power supply of the I/O componentsand for DC 24V power supply of via backplane bus connected peripheral modules, theCPU has removable connectors. By installing of up to 64 periphery modules at the back-plane bus, these are electrically connected, this means these are assigned to the back-plane bus, the electronic modules are power supplied and each periphery module is con-nected to the DC 24V power section supply.With this CPU 01x, the CPU electronic and power supply are integrated to one casing. Ashead module, via the integrated power module for power supply, CPU electronic and theelectronic of the connected periphery modules are supplied. The DC 24 power sectionsupply for the linked periphery modules is established via a further connection of thepower module. By installing of up to 64 periphery modules at the backplane bus, theseare electrically connected, this means these are assigned to the backplane bus, the elec-tronic modules are power supplied and each periphery module is connected to the DC24V power section supply.CAUTION!CPU part and power module may not be separated!Here you may only exchange the electronic module!With a bus coupler bus interface and power module is integrated to one casing. With thebus interface you get access to a subordinated bus system. As head module, via the inte-grated power module for power supply, bus interface and the electronic of the connectedperiphery modules are supplied. The DC 24 power section supply for the linked peripherymodules is established via a further connection of the power module. By installing of up to64 periphery modules at the bus coupler, these are electrically connected, this meansthese are assigned to the backplane bus, the electronic modules are power supplied andeach periphery module is connected to the DC 24V power section supply.CAUTION!Bus interface and power module may not be separated!Here you may only exchange the electronic module!CPU 01xCCPU 01xBus couplerVIPA System SLIOBasics and mountingSystem conception > ComponentsHB300 | CPU | 013-CCF0R00 | en | 19-3014
