2.6 Demounting2.6.1 Demounting CPU 01xCBy means of a screwdriver there is the possibility to remove the connectors e.g. formodule exchange with a fix wiring. For this each connector has a release lever centrallyon its top side. Unlocking takes place by the following proceeding:1. Power-off your system.2. Remove connector:Push your screwdriver horizontally into the slot between connector and releaselever, until it stops.3. Push the screwdriver downð The connector is unlocked and can be removed by turning downwards.CAUTION!Via wrong operation such as pressing, the screwdriver upwardthe release lever may be damaged.1.For demounting and exchange of a (head) module or a group ofmodules, due to mounting reasons you always have to remove theelectronic module right beside. After mounting it may be pluggedagain.Press the unlocking lever at the lower side of the just mounted right module and pullit forward.2. Turn all the locking lever of the CPU to be exchanged upwards.3. Pull the CPU forward.4. For mounting turn all the locking lever of the CPU to be mounted upwards.ProceedingRemove connectorCPU replacementVIPA System SLIOBasics and mountingDemounting > Demounting CPU 01xCHB300 | CPU | 013-CCF0R00 | en | 19-3032
