4. To transfer the user program and hardware configuration click in the Project tree atyour CPU and select ‘Context menu è Transfer all’.ð A dialog window for project transfer opens5. Select the ‘Port type’ "Ethernet interface" and start the transfer with ‘Transfer’ .6. Confirm the request that the CPU is to be brought into the state STOP.ð The user program and the hardware configuration are transferred via Ethernetto the CPU.7. Close after transmission the dialog.8. With ‘Context menu è Copy RAM to ROM’ you can save your project on a memorycard, if one is plugged.12.9.3 Transfer via memory cardThe memory card serves as external storage medium. There may be stored several proj-ects and sub-directories on a memory card. Please regard that your current project isstored in the root directory and has one of the following file names:n S7PROG.WLDn AUTOLOAD.WLD1. Start the SPEED7 Studio with your project.2. Click in the ‘Project tree’ at the CPU.3. Create in the SPEED7 Studio with ‘Context menuè Export device configuration (WLD)’ a wld file.ð The wld file is created. This contains the user program and the hardware config-urationProceeding transfer viamemory cardVIPA System SLIOConfiguration with VIPA SPEED7 StudioSPEED7 Studio - Project transfer > Transfer via memory cardHB300 | CPU | 013-CCF0R00 | en | 19-30292
