n VIPA SPEED7 Studio from Version V1.8.6– The functionality for the OPC UA configuration is integrated in the SPEED7Studio.n Siemens SIMATIC Manager from version V5.5 and VIPA SPEED7 Studio from ver-sion V1.8.6– The OPC UA configuration is done with the OPC UA Configurator. This is part ofthe SPEED7 Studio from VIPA from version V1.8.6.– When calling the OPC UA Configurator, the SPEED7 Studio opens with function-ality limited to OPC UA configuration.– The OPC UA Configurator is to be called from the Siemens SIMATIC Manager asexternal device tool.– To be able to call the OPC UA Configurator as an external device tool, you mustfirst register it in the Siemens SIMATIC Manager. This is done with SPEED7 ToolsIntegration, which is automatically installed during the installation of the SPEED7Studio.– The OPC UA Configurator is to be called from the Siemens SIMATIC Managerafter project creation and online configuration.– The OPC UA Configurator automatically imports the data for the OPC UA configu-ration from the project data of the Siemens SIMATIC Manager.– The OPC UA configuration is transferred online from the OPC UA Configurator.The OPC UA Configurator automatically imports the data for the OPC UA configu-ration from the project data of the Siemens SIMATIC Manager.n Siemens TIA Portal from version V15.0 and VIPA SPEED7 Studio from versionV1.8.6– The OPC UA configuration is done with the OPC UA Configurator. This is part ofthe SPEED7 Studio from VIPA from version V1.8.6.– When calling the OPC UA Configurator, the SPEED7 Studio opens with function-ality limited to OPC UA configuration.– The OPC UA Configurator is to be called from the Siemens TIA Portal as externaldevice tool.– To be able to call the OPC UA Configurator as an external device tool, you mustfirst register it in the Siemens TIA Portal. This is done with SPEED7 Tools Integra-tion, which is automatically installed during the installation of the SPEED7 Studio.– The OPC UA Configurator is to be called from the Siemens TIA Portal afterproject creation and online configuration.– The OPC UA Configurator automatically imports the data for the OPC UA configu-ration from the project data of the Siemens TIA Portal.– The OPC UA configuration is transferred online from the OPC UA Configurator.The OPC UA Configurator automatically imports the data for the OPC UA configu-ration from the project data of the Siemens TIA Portal.7.2 Basics OPC UA7.2.1 OPC UAOPC UA defines a common standard for data and information exchange in an ‘Industry4.0’ environment. Due to the platform independence, the integrated security concept andthe data type information supplied with the data, OPC UA provides the basis for machine-readable and cross-level communication.n Classic variant not scalable and exclusively for Microsoft WindowsÒn For each type of data transfer, such as real-time data, history data, interrupts, events,etc., a separate solution with its own semantics is required, such as OPC DA, OPCHDA, OPC A&E, etc.n Separate and complex effort required for security settings.PreconditionStandard for data andinformation exchangeOPC - Open PlatformCommunicationsVIPA System SLIODeployment OPC UABasics OPC UA > OPC UAHB300 | CPU | 013-CCF0R00 | en | 19-30184
